Product Details:

• 2013-2019 Dodge Ram 1500 special services police truck vehicle specific 22" console. also fits 2013-2019 1500, 2500 and 3500 Dodge Ram retail pickup with 40/20/40 seats (when center /20/ section is removed)
• 2018-2019 retail vehicle has OEM media hub that is different if vehicle has an OEM apple carplay option. Havis bracket C-EB15-DAP-1P included if you desire to mount the different style hub into the C-VS-0814-Ram-2 console.
• Does not work with OEM full center console or 4 x 4 floor shifter.
• If installing console into a Dodge Ram 1500 special service police truck, you will need to separately purchase the C-B66 bracket kit from Havis or the OEM center seat brackets from a Dodge parts supplier
• See "related product information" under resources tab for details and part numbers
• See resources tab above for bracket details in the installation instructions or the related product document for OEM part numbers
• Replaces factory OEM small center seat section and fits between bucket seats
• One piece console housing with one piece floor platform
• Fits against lower dash
• See drawing min/max for mounting depth allowed for control heads and/or options
• Vehicle mounting kit included
• C-HDM-214, C-MD-112 recommended for mounting laptop platform or
• C-HDM-204, C-MD-204 with C-HDM-302 recommended for mounting laptop platform
• Also works with C-HDM-111
• If using a vertical gun rack between seats, a partition with gun alcove is recommended
• Overall length from dash 28" long
• Rear horizontal section is 6" high, 9" wide
• Forward section angles from 6" to 10" high and sides taper from 9" to 12" wide (add approximately 2" height for one piece floor platform)
• 8" equipment bracket space-angled front (when using included 2" equipment bracket equipment space reduced to 6"), 14" equipment bracket space horizontal rear
• Includes two (2) 12 volt sockets with wire and fuse and one (1) C-AP-0325 accessory pocket. C-AP-0325 is built into console and does not use internal face plate space
• Includes 2" high face plate for OEM aux / USB connectors (p/n: C-EB20-RAU-1P). C-EB20-RAU-1P will use 2" inches internal face plate space
• Includes C-EB15-DAP-1P/C-FP-05 equipment bracket. will use 2" internal mounting space.